CODA™

Two channels and 600 watts, plus effects.

Features – Amp Head

  • Extended frequency range, high fidelity sound
  • Light weight (<4 lbs.), small size (10.2 x 8.2 x 3.5)
  • Unique, slanted front chassis
  • Mounts in cabinet using Cabrio Docking System
  • Separate XLR and 1/4 inch inputs in each channel can be used simultaneously
  • 48V phantom power and 10 dB gain select for mic input
  • Input level control per channel
  • Four band EQ per channel
  • Selectable phase reverse and sweepable low cut filter per channel (phase reverse can be converted to low pass speaker emulation filter with internal jumper option)
  • Effects loop per channel
  • Selectable reverb and delay effects with level and rate controls and pseudo stereo output
  • Direct out with selectable 10 dB pad, pre/post switch and ground lift-Headphone output
  • Switchable limiter
  • Mute switch
  • Mono or stereo output from the preamp section
  • Selectable internal jumper options for gain and stereo operation
  • High fidelity, low noise operation: 110 dB SNR at direct out         
  • Automatic voltage switching for universal AC mains operation
  • 650 Watt output at 4 ohms (music power)
  • Dual speaker outputs with speakon connectors


Features – Speaker Cabinet

  • Sealed two-way speaker system
  • Lightweight (22 lbs) structural foam cabinet
  • Downfiring poly cone 10 inch driver + 5 inch midrange with level switch
  • Comes with a fitted slip cover with shoulder strap

Technical Specs

System

Frequency Response

30 Hz-18 kHz (40-14 kHz ±3 dB)

Max SPL

>112 dB at 1 meter

AC Power

100V to 240V, 50/60 Hz, switched automatically

Size

12"H x 15"W x13"D

Weight

22 lbs, 19 lbs (EX)

Amp Head

Frequency Response

20 Hz - 20 kHz (±0.5 dB)

Signal to Noise Ratio

>110 dB at direct out

Controls and Inputs

Mic Input

600 ohm balanced, XLR connector, switchable 10 dB gain

Phantom Power

48 volts, on/off switch w/LED indicator

Instrument Input

1 M Ohm impedance, 1/4 inch jack

Direct Out

+4 dB, balanced, XLR, ground lift, pre/post EQ selector, switchable 10 dB pad

Effects Loop

Parallel type

Low Control

Shelving type, ±12 dB at 50 Hz

Low Mid Control

±12 dB at 250 Hz

Hi Mid Control

±12 dB at 1200 Hz

Treble Control

Shelving type, ±12 dB at 8 kHz

Low Cut Filter

-12 dB/octave sweepable from 30 to 150 Hz

Phase Reverse

Switchable 180 degree phase reverse

Speaker Emulator

(if selected) -12 dB/octave at 4 kHz

Effects

Type

24 bit digital with 3 programs

Programs

Reverb with variable decay time,
Delay/Reverb with variable delay time
Delay with variable delay time
All have variable wet/dry mix and “pseudo stereo” capability

Amp head

Topology

Class D (PWM)

Switching Frequency

500 kHz

Output Power 8 Ohm

300W rms continuous, 350W rms music (40% duty cycle), 500W peak transient

Output Power 4 Ohm

500W rms continuous, 650W rms music (40% duty cycle), 1000W peak transient

Ext Speaker Output

Speakon type (pole 1), 2 Ohm min load including internal speakers, if connected

Speaker System

Woofer

10 inch, downfiring

Midrange

5 inch, forward firing with 2 position level control switch

Crossover

Passive, alignment corrected

Impedance

8 Ohm

Power rating

250W

Supplied Accessories

Fitted slip cover with cord storage pocket and shoulder strap

Available Accessories

Padded gig bag with shoulder strap made by Mooradian, kit to convert cabinet with head removed to an extension cab (adapter, filler panel, padded case for head)